Touring Bike For Sale

Bike For Sale!

Ready To Tour

It's a beauty! Here is a fillet brazed 26" wheeled touring bike that is ready to travel. It's loaded with cool stuff, and is now for sale. This bike was seen at 2012 North American Hand Made Bicycle Show in Sacramento, California. 

Here is quick run-down of the features: 

26" wheels, clearance for 2.3" tires with fenders; wide Rhynolite rims

Frame size: 575mm top tube and 600 mm seat tube. The standover with 2.0" tires is 860 mm (slightly less than 34"). Seat tube angle is 73 degrees; head tube angle 72 degrees; fork rake is 60 mm and trail is 45 mm.

This bike has traditional tubing diameters (1" top tube and truss; 1 1/8" down tube; 1" threaded fork steerer). The truss top tube is for added stability from the front to the back of the bike when the bike is loaded. 

Low profile racks front and rear. Rear rack ties into the fender for a very clean look. Front low rider racks are detachable and have 3 mounting points for added stability. Both front and rear racks were designed around the smaller front-style Ortlieb panniers. Integrated Rear RackDetachable Front Low Rider Rack

Bike comes with a large Carradice seat bag. The bag has a small support rack to stabilize it. Between 4 panniers and the large seat bag, this bike has serious carrying capacity (Panniers not included).

New-old stock XTR front & rear derailleurs, and XTR rear 9 speed cassette hub.

New-Old Stock XTR Derailleurs

Front generator hub which powers both the front and rear lights.

Gilles Berthoud leather saddle; high polish seat post by Paul Components, and Berthoud stainless fenders.

Sugino Mighty Tour triple crankset: 48/36/24T

Chris King headset; Nitto Pearl stem, 110 mm; Nitto Noodle handlebar, 44 cm; Brooks leather bar wrap

Last but not least is the silvery blue paint. It's a thin wet paint that is a near perfect match of the blue-gray highlights on the vintage XTR derailleurs. It's a gorgeous finish, pleasant and understated. 

Large Size Seat BagA lot of thought went into the design of this bike. It would make a great randonneur, light touring or fully loaded touring bike. It has excellent functioning parts that are durable, and are nice to look at. This bike is going to fit a person who is between 6' and 6' 3" and it's safe to say, it's going to make someone very happy for years to come. 

Head Tube BadgeThe price of this bike is negotiable. It's now a used bike, and has been tested on tour and longer rides. Because of this there are some scratches in the paint, and some wear on the parts. The bike is sold as is. All reasonable offers will be considered. If you have any questions, or to request further information, please send me an e-mail

Here is a gallery with other photos of the bike. 

Enjoy!

Oregon Manifest Bike

Here is my entry to the 2011 Oregon Manifest. The 50 mile ride was good. The weather was just about perfect, even if a little hot, and the route took us through some awesome backroads. There was a combination of paved roads and gravel, with a lot of climbing along the way. I was very pleased with the bike. It was solid, quiet, had the gears I wanted for climbing and it carried the load without a hitch. I ran some pretty large tires so that the gravel sections weren't a problem, and descending with weight the bike felt sure and stable. The bike did everything I asked of it, and did it well. 

There were a lot of great entries in this event. I can't imagine having been a judge, trying to decide which bikes were winners. I think a congratulation should go out to everyone who did the work building the bikes, and for all those who rode the ride. And a special congrats to Tony Pereira for taking the cake. Nice job Tony!

Here are photos of the Ahearne entry with a summary of features to follow. 

Oregon Manifest Bike

This is the Ahearne Cycles entry to the 2011 Oregon Manifest competition. There were several criteria that the all the entrants were supposed to fulfill, most of which were in the realm of bikes that I often build. The bikes are to have lights, fenders, a locking system, a way to carry things besides the rider, etc. Here's a quick list of the features this bike offeres:

24 inch front wheel, 700c rear. The rack is fixed to the frame and is rated at about 50 lbs. maximum capacity. The small front wheel allows the basket to be lower, which drops the center of gravity and makes for a more stable ride with a load. 

The basket has an integrated lock holder (no rattle), a bottle opener, corner bumpers (dead tire), a weatherproof DiBond base (aluminum sheet with a dense plastic core -- light-weight & bomb-proof), a large waterproof bag by Inside Line Equipment, and shown here there are 2 speaker mounts and a water bottle cage (also on the basket). There is also a bolt-on utility bag on the rack which is for spare tubes, tools, straps and bungee cords, etc. 

There is an insanely bright lighting system (600 lumens!) that runs off a rechargeable battery pack hidden under the rack, which is charged off the generator hub. It's a prototype lighting system by Light On! lights. The wired tail light is internally routed, and if you look closely, it is mounted to a bolt that runs through the seat tube and serves the double purpose of being a seat post lock -- the seat post is slotted, and can't be removed without taking out the light mount bolt. 

Speaking of security, there's a hidden lock for the kickstand so that, when the kickstand is open and the lock engaged the stand can not be retracted. I'd love to see a thief try and ride off on the bike, but not be able to figure out why the stand won't go up. 

The bike has clearance for very large tires. The fenders are full wrap, with a 26 inch rear fender covering the front wheel. There's a supplementary blinky tail light and reflector on the rear fender by Portland Design Works. 

Beyond these features, the bike has a lot of the little things I believe should be standard on a hard core commuter bike: full gear range, bell, pump, disc brakes (advisable, especially for rainy climates), wide puncture resistant tires, comfortable upright riding position, wide flat pedals, etc. 

The final thing is the aesthetic, which is subdued and classy. I didn't want to over-invent a machine that has been designed & refined for well over a hundred years.